| Customization: | Available |
|---|---|
| Material: | Metal |
| Type: | Replica Screamer Overdrive Guitar Pedal |
|
Still deciding? Get samples of US$ 25.68/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Little Green Wonder Overdrive
Clone Mad Professor Little Green Wonder Overdrive
It's a low compression, high headroom overdrive with high output.
BJF DESIGN HIGH HEADROOM OVERDRIVE WITH ADJUSTABLE LOW/MID EQ BALANCE
Premium quality classic blues/rock pedal that works very well with complex overdriven amp sound. This pedal is now offered as lower-priced pcb-model or hand-wired pedal. Both share the same specs and tone.
It's a low compression, high headroom overdrive with high output, and it has a Body knob for adjusting low-mid content and treble. The LGW was made to be a stackable overdrive that could go anywhere in the pedal chain and the compression normally associated with this type of circuit is reduced same as several distortion mechanisms.
This pedal will work very well with amps and other pedals that have a lot of complexity or compression, a situation that not all pedals work well. LGW makes a great building block to sound yet it works standalone and especially with humbuckers where normally this type of circuit would not work satisfactory, much due to bass loss and sometimes separated sounds (where transients feed through and a cloud of distortion follows beneath.
Body control gives access to medium midhump at the center position and allows treble boost at CW rotation and low mid/treble boost a CCW position and so unit also can provide distortion albeit a smooth type. LGW can be used as an overdrive to already distorting amplifiers or pedals downstream, as well as function as a filter when feeding with fuzz pedals that may be rough on some amplifiers and can also be used as a light overdrive for just breaking up sounds.
Clone XOTIC-BB PREMAP Guitar Effect Pedal Overdrive/Preamp.
The BB Preamp offers a wide variety of sounds. It's capable of a 30dB+ clean boost with an adjustable ±15dB two band active EQ which adds a wide range of harmonic content to your ideal sound.
» The BB also utilizes a pre-gain stage which allows the pedal to go from a very pristine clean to a very smooth, compressed, overdriven sound.
From a Clean Boost to Thick, Creamy Overdrive
Any guitarist can benefit from the BB Preamp overdrive pedal, a real tonal Swiss knife. The pedal works equally well for getting thick and creamy overdrive tones with great sustain as it does for pushing the clean front end of an already driven amp with up to 30+dB of boost.
CLONE SHUR-ROIT DISTORTION
The Riot, as its name playfully hints, is a high-gain distortion box that will make a small clean tube combo sound like a raging stack. We have heard many distortion boxes and were never quite satisfied with how they sounded or felt with a clean amp. We wanted the sonic characteristics of the distortion and the way the pedal reacted to your touch like a high-gain 100w tube head. After much testing, re-working, and re-builds of the Riot over a period of a year, we are finally satisfied with how it performs and sounds in real world music applications with pro musicians performing live or in the studio. The Riot will make you forget that you're playing through a pedal.
It works with the amp to deliver a big full sound that never sounds artificial or overly electronic. There are no bees-in-the-jar buzziness, harsh high-end or tubby lows that are often what you hear in high-gain distortion pedals. Again, a pedal is highly dependent on the amp it's connected to and how the amp is set, but the Riot will perform exceedingly well with virtually any decent tube amp out there - even with old vintage-style Blackface type of amps. Get musical distortion and an amp-like feel from the Riot. If you need alternative high-gain sounds without adding another amp, the Riot is the ticket to high-gain heaven in a small package.
CLONE TIMMY OVERDRIVE
The Tim pedal's little brother with all of the tone of its larger sibling, but lacking the send and return jacks as well as the boost channel and boost controls. For those desiring Tim tone in a simpler, more space efficient size.A pedal of near mythic proportions, the Timmy pedal works in conjunction with your amplifier's natural tone to add anything from a mild boost to a strong overdrive without changing the overall character or architecture of your favorite amp's inherent tone.A wonderful, natural enhancement to your tone that is extremely organic.At low settings you will be able to effortlessly achieve a sound that is simply "more" of what your amp already offers. As the gain is turned up, and the pedal's EQ adjusted accordingly, smooth, singing, round and reedy tones are at your fingertips.The Timmy pedal's responsiveness is exactly like that of a great, tube amplifier in that it responds immediately to your right hand's attack.
Hand-built Classic Chorus CE-2 Guitar Effects Pedal Based on Boss Chorus true bypass
The CE-2 chorus is upgraded and made on the basis of the Boss CE2 Chorus, it has true bypass function.
Perfect clone, using the imported original IC: MN3007, MN3101, and using the quality components and the same circuit as the original one, especially, it's still built with the high-precision plug-in components only (not SMD technology) as the original one, so that it is as close to the original sound as they come.
If you want to find a good Chorus, then this pedal is just what you're looking for, and you will like it.
Features:
• Rate controls
• Depth controls
• True bypass switch
• On/Off LED indicator
• Connectors: Input, Output, AC Adaptor
• Current Draw: 9 mA (DC 9V)
• Input Impedance: 470kOhm
• Signal/Noise Ratio: 90dB or more
• Recommended Load Impedance: 10kOhm or greater
• Dimensions (W/D/H): 112mm X 65mm X 38mm
• Weight: 400 g
• Battery Type: I pc 9VDC battery (Not included)
• Recommended AC Adaptor: ACA Series (Not included)
The TS9 TS808 Tube Screamer is made on the basis of the classic original TS9 and TS808, the most popular vintage overdrive on the world. We take these two model together in one, 2 effects in 1 pedal, and it's also built with plug-in components, not SMD technology, using the best quality components and the same circuit as the original one, so it is close to the original sound as they come.
Using a two-Position to change the effects: TS9 effect and TS808 effect, so if you want to find a Vintage overdrive effect, then this Tube Screamer is just what you want.
Features:
One two-position switch: TS9 overdrive and TS808 overdrive
Updated IC: JRC4558D
Drive controls
LEVEL controls
Tone controls
True bypass switch
100% analog signal path
On/Off LED indicator
• Dimensions (W/D/H): 112mm X 65mm X 38mm
• Weight: 0.6 lbs. (280g)
• AC Adapter (Optional): 9VDC, Negative Tips (Regulated recommended)Rat Distortion,Big Boost- Guitar Effect Pedal Based on Pro Co Rat Distortion
About The Super RAT:
The SUPER RAT is based on the Pro Co RAT Distortion Pedal , IC :LM308
And Improvements based on the original circuit adds two effects ,
Use a three-position toggle switch to change the effects: classic rat ,big boost ,turbo rat.
So it can use as distortion ,boost ,preamp,.
Features
•One three-position switch: C- classic rat distortion ,B-big boost ,T-turbo rat distortion.
•Tone( Filter) control
•Gain(Distortion)control
•Volume control
•True bypass switch
•100% analog signal path
•On/Off LED indicator
• Dimensions (W/D/H): 112mm X 65mm X 38mm
• Weight: 0.6 lbs. (280g)
• Power Consumption: 9VDC/10mA
• Battery Type: 9VDC x 1
• AC Adapter (Optional): 9VDC, Negative Tips (Regulated recommended)
• Input Impedance: 500k ohm (min)
• Output Impedance: 10k ohm
Clone and Based on fultoneOCD. Classic Overdrive pedal
The Fulttone Obsessive Compulsive Drive (OCD) is an extremely open sounding Overdrive/Distortion circuit that differs from other
overdrives in that it has a good bit more Dynamic-Range…meaning the difference between picking soft or picking hard will actually yield a
more natural and wider range of distortion (with less compression) than traditional diode-clipped overdrives. The OCD also creates
complex overtones without changing the inherent tone of whatever amp and guitar you're playing through, in the process lifting off that
blanket other drive pedals can put on your signature sound.
The OCD accomplishes its tube-like distortion through the unusual combination of overdriving its JFET opamp, and then hard-clipping with
a pair of MOSFETs later on in the circuit. This topography did not exist in a pedal prior to the OCD, and the circuit works very well with a
vast array of guitars and amps. Because of its large amount of available output volume, the OCD works great as a booster in front of amps
to goose them into submission, as well as through Master-Volume amps to drive them much harder than most OD's can, but it also excels
at creating its own distortion with all the chime of a Class A amp and its complex array of overtones. The OCD gives you the feeling that
your amp is Cranked at even living room volume so Clean playing is more dynamic and dirty sounds still have the ringing overtones. The
OCD's can access a slew of other in-between sounds by simply turning up or down your guitar's volume control, in fact, no other pedal
"cleans up" like the OCD. Try it at 18VDC and you get another level of dynamic range and clarity. I recommend using the Fulltone IPS-18 for
18volt operation (for use in all countries) as it is regulated and dead-quiet. Avoid other "switching type" power supplies, as we get a lot of
reports that the majority of them hum or create strange synth-like noises. Ours is quiet.
There are a lot of OD's comparing themselves to and stealing from the Fulttone OCD, and that's to be expected when you're the best selling
handmade overdrive of all time. There are many out-and-out clones of the OCD, and that's some form of a compliment I suppose, but I'd
like to personally thank you for buying and supporting the original...the one and only OCD.
Along with standard Volume, Drive, and Tone controls, the OCD's HP/LP (High Peak/Low Peak) switch takes the pedal from a clean boost to manic, sustain-laden distortion. True bypass switching.
Features
Tube-like overdrive and touch-sensitive response
HP/LP switch for instant re-voicing and uses
Volume, Tone, Drive controls
Mini Clean Booster Guitar Effect Pedal Boost And true bypass
The EP Booster is designed and Clone XoticEP-Booster, perfect built, and using the same circuit design and the quality components, so it is very close to the original one as they come.
Using the best quality components with a discrete FET design and low impedance output, the XP Booster provides up to +20dB of unadulterated boost with multi-dimensional, shimmering highs and lows, and no ear fatigue. The internal DIP switches let you choose the boost frequencies and EQ settings.
Features:
Single Knob Controls
Internal DIP Two EQ swithes
True bypass switch
On/Off LED indicator
Very small and exquisite
• Dimensions (W/D/H): 95mm X 38mm X 36mm
• Weight: 0.3 lbs. (145g)
• Input Impedance: 1M ohm
• Output Impedance: 1k ohm
• AC Adapter (Optional): 9VDC or 18V, Negative Tips (not included)Custom SSS Pedal Dumble style:
we have our own QC department, so we will ensure the quality. if any problems on our products, we will offer free repairmet, you can just pay for shipping cost.
Packaging & Shipping:1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO)
2. Orders processed timely after the payment verification.
3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
4. The images shown are not the actual item and are for your reference only.
5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
6. If you have not received your shipment within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
7. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.
Why choose us?
1)We are Professional guitar pedal manufacturer
2)OEM &ODM design here
3)Can print your own logo
4)Deal with Manufactory Directly Here!
Choose Pedal, Choose Grand!!!
){kind=link}